NAPA Echlin TPMS

Test Quiz

Please sign up for the course before taking this quiz.

1. The final step of any tire related repair should be to:
- Rotate all tires in a clockwise pattern
- Top off all tires
- Perform a TPMS relearn
- Fill the gas tank
2. “Test, Not Guess” encourages the technician to test the entire system to get a complete understanding of total system performance rather than simply repairing the first fault they find.
- True
- False
3. If the TPMS lamp is on solid (after the initial bulb check), it indicates:
- A TPMS sensor is not communicating
- The TPMS transmitter has a low battery reading
- One or more tires are improperly inflated
- The gas cap is loose
4. A flashing TPMS light means that there is a problem with a component in the TPMS system (sensor, module, etc).
- True
- False
5. On many GM vehicles, including the truck being worked on in the placard video, the TPMS information is hosted in the __________ .
- Transmission Control Module
- Powertrain Control Module
- Body Control Module
- Remote Control Door Lock Receiver
6. A visual inspection will allow a technician to see if a tire is over or under inflated.
- True
- False
7. On a vehicle with OBD relearn the information is transferred from the TPMS tool to the vehicle via the OBDII connector.
- True
- False
8. On a TPMS equipped vehicle, it is important to verify the TPMS system operation prior to doing any tire service work.
- True
- False
9. When doing a stationary relearn, most vehicles have the relearn procedure start with the:
- Left Rear Tire
- Left Front Tire
- Right Rear Tire
- Right Front Tire
10. It is against the law to “render a TPMS system inoperative”. Meaning that if it came in working, it must leave the facility in correct working order.
- True
- False

Back to: Test

© 2025 Standard Motor Products, Inc.

Need assistance? support@aviondemand.com or call 1 (800) 718-7246
For Program Suggestions: aep@smpcorp.com